How To Polish Marble

how to polish marble

When it’s polished, marble looks absolutely incredible. The shine is probably the main reason why you decided to purchase marble to begin with. If you want to know how to polish marble, we’ve got you covered.

The good news is that it’s a fairly easy process, and the method for polishing marble is basically the same for floors, countertops and most other surfaces, so once you know how to do it, you can apply the technique to any part of your home.

When it’s fully polished and shiny, marble serves as a durable, sophisticated alternative to wood, laminate and several other building materials. A number of antique items have marble tops, such as older wash basins, mantels and coffee tables.

If you clean marble clean and polished, it can last a lifetime. To get started, you’ll want to make sure that you clean the marble. Once it has been adequately cleaned, you can begin the polishing process.

Cleaning the Marble Surface

To get started, wipe the marble down using a cloth that is soft and dry. This will remove all surface debris resting on the surface. Next, grab a non-abrasive sponge and let it soak up some warm water.

Make sure to adequately wring out the sponge, so you can use it to wipe down the surface. Next, you’ll want to spray the marble surface with commercial stone cleaner and use a soft, clean rag to wipe it off.

If you don’t want to use a commercial cleaner, you can add one or two drops of liquid dishwashing fluid and wipe down the surface again.

Next, dry the marble top sing a chamois cloth. You can buff it to a shine by using the cloth to rub the entire surface in small circles.

The next step involves covering the surface with commercial stone polish. You can also use marble polishing paste if you desire additional shine. If you decide to use a spray-on stone polish, make sure to wipe it down using a soft rag.

If you use polishing paste, follow the product’s directions. After you’ve finished this process, you’re ready to move on to the next step.

How to Polish Marble

Before you get started with the actual polishing process, you need to find out if you’re dealing with cultured or natural marble. There are three main methods that you can use to find out what type of marble you’re working with.

  • Method #1 consists of laying your hand onto the surface and make a mental note of how warm the surface feels to the touch. Natural marble is almost always cooler to the touch than the air that surrounds it. A cultured marble surface should feel almost exactly as warm as the air around it.
  • Method #2 consists of lightly scratching the marble in a hidden spot. You can use a nail to gently scratch the surface. Next, grab a magnifying glass and find out if the nail caused a scratch. Natural marble tends to scratch quite easily while cultured marble doesn’t.
  • Method #3 involves acid. Find a hidden spot where you can run the test. Apply a few drops of vinegar to the surface. If the marble is natural, you should notice the vinegar causing some fizzing and bubbles. When you’re finished, make sure to quickly wipe away the vinegar before it causing damage to the surface.

Polish Natural Marble

If you have natural marble, then simply follow this process to get it polished. First, remove existing stains. Marble is a very porous material, and stains occur when contaminants are allowed to seep deep into the stone.

Cooking oils, wine and juice are some of the worst offenders. Make sure to always wipe up spills immediately after they occur. You can use a damp cloth, lukewarm water and mild dish soap to remove any stains.

You might want to consider using poultice to draw out stubborn stains. You can easily look up how to use poultice, but it’s not a required step.

Once the stain removal is finished, you’ll need to start the polishing process with a dry, clean surface. Since marble is soft, it scratches quite easily. To polish the marble, apply a mixture of water and baking soda.

To make the polishing solution, combine three tablespoons of baking soda and one quart of water. Make sure to mix well and use a clean cloth. Apply a thin layer of the mixture to the marble surface. Let it dry for about five hours and use a clean, damp cloth to rinse the surface of the material.

Use another clean cloth to dry and buff the material. You can use a soft chamois or microfiber cloth. Wipe down the marble gently using circular motions. If you want to prevent stains, go ahead and add a sealant.

Polishing Cultured Marble

The process for polishing cultured marble tends to be much easier than its natural counterpart. The cultured marble is manufactured with a protective coating, so it’s nowhere near as vulnerable to scratches.

You’ll want to get started by removing stains and scrubbing the surface very well. You can use white vinegar to remove hard water stains. To polish the surface, apply some sort of polishing compound, which should be designed for use with cultured marble.

You might also consider using the carnauba wax that is frequently used to polish automobiles. If you also want to seal the marble surface, make sure to use a gel polishing product.

You can use these polishing techniques on marble floors, countertops, surfaces and more. The techniques don’t take too long, and they have the power to restore the former beauty of your favorite marble surfaces.