Are you tired of soap scum? Well, we are too, so today, we’re going to teach you how to remove soap scum using several different cleaning agents. Unfortunately, soap scum is a natural part of everyday life because it accumulates when we bathe in the shower.
The same substance that you use to get clean each day actually leaves your shower looking quite grungy. In case you didn’t know, soap scum is actually caused by reactions between the ingredients inside of soap and minerals in water.
It contains pieces of dead skin, bacteria, dirt and body oil, which is why it must be removed. If soap scum is allowed to harden on your shower enclosure or similar surface, it can be very difficult to remove, which is why we recommend regular cleaning.
One of the easiest ways to remove soap scum requires the use of store-bought cleaning agents. A popular choice is Dow Scrubbing Bubbles, and the process for using commercial cleaning products is very straightforward.
You’ll want to start by spraying all of the dirty surfaces. The shower and tub are normally the biggest offenders. Allow the cleaning agent to rest on the scum for at least a few minutes.
It shouldn’t take too long for the cleaner to work its magic and slice through the grease, grime and scum.
Once you’ve allowed the cleaner to soak in, grab a cloth, scrubbing brush or sponge and wipe everything down. When you’re finished giving everything a good scrub, go ahead and rinse everything off. For the best results, use a clean towel to quickly dry every surface.
A lot of people are against commercial cleaners, or they just don’t like the idea of using harsh chemicals. For these individuals, homemade cleaning solutions can work just as well. There are several DIY cleaners that you can use to eliminate soap scum.
One of the most effective solutions is the typical vinegar and baking soda formula. You can make this cleaner by combining a cup of baking soda with enough vinegar to end up with a basic paste.
After the cleaning solution has stopped fizzing, you can begin using it.
Just use a simple sponge to apply it to the trouble areas and let it sit for about 15 minutes. Next, wipe all of the surfaces down using a sponge that won’t scratch anything. When you’re finished wiping it down, give it a good rinse and make sure to dry it off.
Dish Soap and Vinegar
There is virtually no soap scum on the planet that can stand up to the power of vinegar and dish soap. To create this cleaning formula, you’ll need to mix equal amounts of water and vinegar inside of a spray bottle. Next, add one tablespoon full of dish detergent.
Give the bottle a good shake and spray the solution onto the target areas. Make sure to let the mixture sit on the scum for about 15 minutes.
Come back and scrub everything using a soft-bristle brush. Give everything a good rinse with hot water and dry every surface with a towel.
How to Prevent Soap Scum
Did you know that you can actually prevent soap scum? Cue sarcastic voice. It’s much easier to prevent soap scum from forming than having to clean it after it’s been hardening for several months.
To prevent this nasty stuff from accumulating inside of your shower, try to use liquid soap instead of bar soap. The fatty acids and talc inside of the bar soap is what contributes to buildup.
By switching from bar soap to gel or liquid soap, you can eliminate half of the problem instantly. Another part of prevention involves keeping your tub and shower dry.
You can use a squeegee and towel to keep everything dry. However, this might be overkill for most people.
Another idea is to soften your water. Soap scum loves hard water. To remove many of the minerals that cause scum to form, you can have a water softener installed inside of your home.
If you have plenty of disposable income, you might even consider purchasing an automated shower cleaner.
These are some of the easiest and fastest ways to remove soap scum from your shower or bathtub. Some of them require the use of commercial cleaners while others can be carried out with products that you can find around your house.