A Detailed Look At Water Damage Restoration

So, your home has just been severely damaged, and you believe you need water damage restoration. Unfortunately, the solution to this problem might not be nearly as simple as you would think.

This type of damage can occur in any number of situations. In some cases, a nearby creek floods and leaves a home with over a foot of water inside of it.

Maybe your home suffered a serious plumbing malfunction and left your kitchen or lower story filled with many inches of water. Regardless of how it happened, water damage is no joke. It can significantly impact the value of a home.

water damage restoration

What Is It?

The expensive water damage restoration process is meant to restore your property back to pre-loss condition. Currently, there aren’t any regulations for this process in the United States that dictate how the process must be performed. However, the RIA and IICRC offer some recommended standards of care, which help to make sure companies do the best possible job.

How the Process Works

Ever wondered what happens after you call a water restoration company? There are several steps in the process that you’ll need to go through until your home is restored. The first step involves immediate inspection. Technicians will come out to your home and inspect it.

They will quickly determine the full extent of the damage. The technicians will likely use specialized equipment to determine the severity of the water damage.

Some common tools they might use are moisture meters and infrared cameras. These tools are important because they’re capable of detecting hidden water found in the ceilings, floors and walls.

It’s crucial for technicians to know just how much water is in these areas. The technicians will also be able to tell you what items are able to be saved and what ones aren’t.

Depending on the level of damage, the carpet might be salvageable, or it might need to be replaced. Technicians will also produce a drying plan that can be used to safely remove all of the moisture from the home.

Industrial Drying

After all of the analysis is complete, the technicians will start the extraction process. They’ll use strong truck-mounted tools, which are able to remove standing water.

They’ll also employ other types of drying equipment, like air movers or dehumidifiers. Technicians will dehumidify the walls, floors and other structures. This entire process is very important because it’s used to prevent mold growth.

The drying process will be monitored carefully, and moisture levels will be recorded. Technicians will also make adjustments to the process as needed. They will continue working until EMC has been reached, which stands for Equilibrium Moisture Content. If sewage has leaked anywhere, this will also need to be cleaned up.

Finishing Up the Process

Eventually, technicians will finish up the process with deodorization, sanitation and repairs. As your home continues to dry, it will be inspected to see if it needs deodorization, sanitation or structural repairs.

It’s not uncommon for homes to need these sorts of repairs after significant water damage has occurred. As the drying reaches its end, the odors that were present with the excess moisture will begin to fade away.

However, it’s quite common for technicians to use specialized equipment to eliminate lingering odors. If mold is detected, it might be necessary to get help from mold remediation specialists.

It’s also not uncommon for belongings to require repairs, such as appliances. In excess amounts, water can cause a lot of damage to most appliances.

Final Cleaning and Reinstallation

The final portion of water damage restoration might consist of carpet reinstallation and additional cleaning. If your carpet was removed for cleaning, the technicians will reinstall it at this point in the process.

If your carpet was able to be salvaged and dried in place, then technicians might just perform a full cleaning on it, which would include disinfection and deodorization. Tile, upholstery, natural stone and other surfaces might be cleaned at this point.

Common Causes of Water Damage

As mentioned earlier, there are several common causes of water damage. Leaky toilets, broken water lines, faulty door and window installations, burst pipes and leaky roofing are all common causes.

The good news is that most homeowner insurance policies will cover the damage if it’s caught early enough. However, if the insurance company is able to prove the homeowner was negligent, then they might deny the claim.

Biggest Damage Caused By Water

Mold is easily one of the worst issues caused by mold. Mildew and mold can be dangerous and can cost a lot of money to repair.

The major issue is that mold usually grows where it cannot be seen, so even if you don’t see any in your home after water damage, it doesn’t mean there isn’t any. It’s important to call a specialist if you smell mold in your home. In most cases, you’ll be able to smell it long before you can see it.

The Cost of Water Damage

In 2015, most homeowners are paying around $1,100 to $1,700. However, depending on the amount of damage to your home, you could be paying significantly more or less. The high cost is $5,800 and the low cost is $960.

You’ll find that the average price of water damage restoration is about $10 to $13 per square foot. Hiring professionals is the best way to clean up water damage. If you have insurance, the process should be fairly straightforward.

<!– –>

Leave a Comment